Description
A compact lock designed to fit within very narrow sliding door stiles without compromising the high degree of security these doors need. The sturdy stainless steel bolt has two important features not usually found in sliding door hardware. First, it is adjustable: a full 3/16" lengthening or shortening of bolt projection is possible by turning an exposed screw in the face of the lock. This can compensate for considerable misalignment between door and jamb. Second, the MS1847 bolt is self-protecting: if the door is closed with the bolt in the locked position, the bolt will retract immediately on contact with the jamb, thus preventing damage or accidental lock-out.
Operation
Can be operated by a standard cylinder, so the glass door may be keyed-in with other types of doors. Three hub slot positions allow installation even where jamb and stile design provides severely limited turn clearance.
Specifications
- Can be operated by a standard cylinder so the glass door may be keyed-in with other types of doors
- Three hub slot positions allow installation even where jamb and stile design provides severely limited turn clearance
- 3-ply laminated stainless steel bolt
- Designed to withstand approximately one-half ton force, either horizontally or vertical
- Case: Stainless steel 1/2" x 3-3/16" x 1-1/8"
- 45 degree hub angle
- Case-packed with machines screws for mounting
- Finish: Stainless Steel
