Description

Description

Installation Instruction

Frame preparation Instructions

Jig Installation Instructions

Trim Plate Installation Instruction

Faceplate Frame Prepping Instructions

F2 FAQ

This unique, versatile, "all-in-one", fire rated electric strike combines strength, (1500 lbs holding force) convenience, (everything you need is in the box) and in an attractive, sleek easy to install design.

What makes this strike unique is the "Saw-tooth Adjustment Locator" design that allows the installer to move the deadbolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. There's no need to order special faceplates, you can adjust the strike to work with any mortise lock. Everything you need is in the box, including a faceplate for centreline latch entry.

We make installation easy. Our unique shim design adjusts vertically on the keeper to align with any latch location to give you up to 1/8" horizontal adjustment. We also include a trim plate for messy frame cuts, a hands-free adhesive template and all the drivers you need to install the strike.

Our unique plug-in latch monitor switch option can be added in the field if you decide monitoring is required after installation. Don't buy another strike...

Applications:

Commercial Centers
Industrial Buildings
Educational Facilities
Retail Outlets
Health Care Facilities
Office Complexes

Standard features

"Saw-tooth Adjustment Locator" design that allows the installer to move the deadbolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. There's no need to order special faceplates, you can adjust the strike to work with virtualy any mortise lock type.

Heavy-duty stainless steel construction with 32D finish (Brushed stainless steel)
Up to 1500lbs (680kg) holding force
Fits frame cutout for HES 1006 (1003)
Accommodates ¾" latch projection
Centerline faceplate included for centerline latch entry
Horizontal adjustability up to 1/8" (3mm) for misaligned frames
Vertical Adjustability for precise deadbolt and latchbolt alignment
Adjustable deadbolt keeper and deadlatch ramp
Accommodates up to 1" deadbolt (Night-latch function only, bolt will not release)
Field selectable voltage input - Accommodates 12 or 24VDC and 12 to 24VAC
Anti-tamper security screws
All installation drivers included
Low current draw (0.19 Amps @24VDC)
"Cool Keeper" Solenoid located in house prevents keeper from heating up
Plug-in wire connector
Trim plate included
Adhesive paper template included
Non-handed
Fail-locked (fail secure) mode standard
Optional Latch Monitor kit
Finish: 32D, Brushed Stainless Steel

Note: Fail-unlocked (fail-safe) strikes are not permitted on fire labeled door

Specifications

Model	Mode	Voltage	Duty	Sound	Amps*	Ohms†
F2164	Fail Locked	12 VDC	Continuous	Silent	.375	37
F2164	Fail Locked	24 VDC	Continuous	Silent	.190	148
F2164	Fail Locked	12-24 VAC	Intermittent	Buzz	.280 - .565	37

Intermittent Duty = Energized less than 1 min. with Duty Ratio 1:5
Continuous Duty = Energized 1 min. or more
* Ratings are based on maximum current draw at +10°C and include initial power-up current draw.
† Nominal resistance at +25°C ± 7% tolerance

The fail secure locking mechanism shall only be installed where allowed by the local authority having jurisdiction and shall not impair the operation of the panic hardware or intended operation of the emergency exit.

WARRANTY